Brake Pads Product Line
This product line encompasses complete disc brake pad solutions for passenger cars, light commercial vehicles, and heavy-duty trucks, engineered across Ceramic, Low-Metallic, Racing, and Commercial Vehicle (CV) formulations.
Manufacturing operations utilize automated raw material weighing and mixing, 2,000-ton hydraulic hot-press molding, and precision thermal scorching to eliminate volatile gases and stabilize initial friction coefficients. All production lines operate under IATF 16949 certified quality management systems, ensuring consistent dimensional tolerances, plate shear strength, and structural reliability across volume batches.
-
13″ Brake Rotor For 8000 LB (8K) Trailer AxlesWe offers three professional heavy-duty 13-inch Dacromet (GAL-DEX) vented brake disc specifications specially engineered for 8000 LB (8K) trailer axles, covering full mainstream 8K trailer hub and
-
12″ Brake Rotor For 5200–6000 LB Trailer AxlesWe provides two premium 12-inch Dacromet (GAL-DEX) vented brake disc options for heavy-duty trailer upgrades: 2/R-12 and 2/H-12. Both models are professionally engineered to fit 5,200–6,000 lb
-
8K Trailer Brake PadMKD250 heavy-duty disc brake pads are engineered exclusively for 8,000 lbs (8K) trailer hydraulic disc brake calipers, serving cargo trailers, boat trailers, RV trailers, utility haulers and
-
7" Trailer Brake Magnet7-inch 2K trailer brake magnet (OEM Part #: K71-057-00) is a premium direct replacement for Dexter electric drum brake systems, specially designed for light-duty trailers with a 2000 lbs (2K) axle
-
Trailer Idler HubTrailer Idler Hub is a non-braking wheel hub assembly designed specifically for brake-less trailer axles. It serves as a core load-bearing and rotating component that connects the trailer spindle and
-
Air Disc Brake PadsFMSI Standard: 1370 / 1370N (FMSI 8480-D1370)Dimensions: 8-1/2*4-1/4Material Formulation: Semi-metallic and ceramic formual built with 100% non-asbestos friction materials.Caliper
-
Heavy Duty Fleet Brake PadsBasic InfoPart No.: 802078 | Cross OE: K070796, D1369, WVA29158, 03057008500 | Fit Caliper: Bendix ADB22X / ADB22X-LT / ADB22X-V, KNORR SK7 Air Disc Brake System Application: Heavy-duty commercial
-
Front Disc Brake Pad for GMHigh-performance ceramic brake pads are primarily made of ceramic fiber, containing little or no metal, and are widely used in passenger cars. As a professional manufacturer, all our products undergo
-
Ceramic Front Disc Brake PadsWhen it comes to automotive safety components, brake pads stand out as the most critical element ensuring driving security. For family car owners, who prioritize daily reliability, comfort, and
-
Great Rear Brake Pad with Minimal Brake DustLow-metal brake pads differ from semi-metal brake pads in that they contain relatively low levels of metals such as copper, steel, and iron fibers. They are a balanced formula that takes into account
-
Front Racing Brake Pad for BMW M5We are a professional manufacturer specializing in high-performance and racing brake components.We produce premium racing brake pads for tuned vehicles, track cars, sports cars and performance street
-
Street Front Brake Pad for Posche 911 TargaHawkshead Copper -free ceramic composite friction formula specially designed for Street and Track Disc Brake Pad Set achieve a stable friction coefficient of 0.38-0.42Completely resolves common pain
Product Types
Car Ceramic Brake Pads
Formulated with non-asbestos organic (NAO) matrices reinforced with refined ceramic fibers.
Engineered for daily urban commuting, delivering ultra-low dust output, minimal noise (NVH optimized), and extended rotor service life.
Car Low Metallic Brake Pads
Formulated with 10%–30% steel fibers and copper-free/low-copper compounds meeting environmental regulations.
Provides high initial bite, aggressive thermal stability, and robust stopping power for high-performance passenger sedans and sport coupes.
Racing Brake Pads
High-density metallic and sintered compound structures designed for extreme thermal loads.
Maintains consistent friction stability up to 750°C, resisting thermal fade under aggressive track and rally conditions.
CV (Commercial Vehicle) Brake Pads
Heavy-duty formulations built for air-disc brake systems on multi-axle trucks, transit buses, and heavy trailers.
Features high-strength mechanical retention backing plates capable of withstanding extreme shear loads under high gross vehicle weight ratings (GVWR).
Key Specifications
|
Product Series |
Friction Material Base |
Friction Coefficient (μ) |
Operating Temp Range |
Noise & Dust Performance |
Primary Application |
|
Car Ceramic |
NAO + Ceramic Fibers |
0.38 – 0.42 (FF Grade) |
Ambient to 400°C |
Very Low Noise / Low Dust |
Passenger Cars, SUVs (Daily Commute) |
|
Car Low Metallic |
Steel Fiber + Organic Resin |
0.40 – 0.45 (FF/GG Grade) |
Ambient to 500°C |
Low Noise / Moderate Dust |
Performance Sedans, Sport Coupes |
|
Racing Series |
Sintered / High-Metallic |
0.45 – 0.52 (GG Grade) |
Up to 750°C |
Track-Optimized / High Dust |
Track Days, Rally, Tuning Cars |
|
CV Series |
Heavy-Duty Non-Asbestos |
0.38 – 0.43 (FF Grade) |
Up to 600°C |
Low Noise / Fleet Standard |
Heavy Trucks, Transit Buses, Trailers |
Vehicle Coverage: European, American, Japanese, and Korean passenger and commercial vehicle platforms.
OE Cross-Reference: Over 2,500 active part numbers matching global OE specifications, WVA numbers, and FMSI standards.
Application Scenarios:
Automotive aftermarket distribution requiring strict OE-matching comfort and cleanliness.
Commercial vehicle fleet operations requiring sustained thermal durability under continuous heavy-duty braking cycles.


Raw Material Inspection: Incoming metal powders, resins, and fibers undergo spectral analysis and particle size distribution testing prior to batch mixing.
Physical & Mechanical Testing:
Shear Strength: Backing plate bond strength tested via ISO 6312 to prevent delamination under extreme thermal and mechanical stress.
Compressibility: Controlled under room and elevated temperatures (<2% at room temp, <5% at 400°C) to guarantee a firm, responsive pedal feel.
Laboratory & Validation Equipment: Full-scale inertia dynamometer testing, Krauss friction testing machines, and Chase friction testing apparatus adhering to ISO 26868 and SAE J661 standards.
OEM/ODM & Customization
Friction Formulation Tuning
Custom friction coefficient adjustment (FF, GG grades) and copper-free modifications to comply with regional environmental standards (e.g., ECE R90).
Hardware & Backing Plate Engineering
Customized backing plate dimensions, thickness tolerances within ±0.1 mm, integrated anti-squeal shims, mechanical wear sensors, and abutment clip kits.
Private Label & Packaging
Laser-etched part numbers and traceability batch codes on backing plates; customized multi-color retail boxes, master cartons, and export-grade pallet configurations.
Ordering & FAQ

Request a Quote
To receive a formal quotation, technical datasheet, or sample testing schedule for specific part numbers, please provide the following details:
Target Part Numbers / OE Numbers:
Vehicle Platform / Application:
Friction Material Preference: (Ceramic / Low Metallic / Racing / CV)
Estimated Order Quantity (Sets / Year):
Customization Requirements: (Packaging, Shims, Sensors, Formula Adjustments)
As one of the most professional brake pads manufacturers and suppliers in China, we warmly welcome you to buy bulk durable brake pads in stock here from our factory. All customized products are with high quality and competitive price. For more information, contact us now.
